Filter
Top Products
15
.
Connecting the IP Phone 2001
components
Follow this procedure to connect the handset to the terminal, and to
connect the terminal to the LAN, and to a power source.
CAUTION
Risk of equipment damage
Do not plug the IP Phone 2001 into a regular telephone jack. This causes severe
damage to the terminal. Consult your system administrator to ensure that you plug
your telephone into a 10/100BaseT Ethernet jack.
See Figure 4 "IP Phone 2001 connectors" (page 16) , for the location of
the connectors.
Procedure Steps
Step Action
1 Connect one end of the handset cord to the handset jack
(identified with a handset icon) on the underside of the terminal.
2 Connect the other end of the handset cord the jack on the
handset.
3 Connect one end of the CAT-5 line cable to the LAN Ethernet
port (identified with a LAN icon), located on the underside of the
terminal.
4 Plug the other end of the CAT-5 line cable into the IP network.
5 Contact your installation technician for the proper power option.
The IP Phone 2001 can be powered by an AC adapter, or over
a LAN.
6 Thread the cord around the strain relief, retaining hook and
channel provided for a secure power connection.
7 Secure the terminal footstand to the base.
--End--
Carrier VoIP
Nortel IP Phone 2001 User Guide (CICM)
NN10300-005 09.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.