Filter
Top Products
Configure services on the IP Phone 2007
52
Configure Area Codes
The Area Code Setup menu enables a user to save up to three area
codes. When an incoming call arrives with an area code that matches one
of the three stored area codes, the incoming call number is reordered to
display the telephone number followed by the area code (as opposed to
the area code followed by the telephone number).
This reordering is also performed when a user scrolls through their
Callers List.
To configure an area code, tap the Services soft key, select Telephone
Options, and select Call Log Option from the menu.
To configure default area codes (three maximum)
1. Press the Up/Down navigation keys to
scroll and highlight Area Code Setup.
2. Tap the Select soft key.
3. Press the Up/Down navigation keys to
scroll and highlight one of the following:
— 1st Code:
— 2nd Code:
— 3rd Code:
4. Tap the Select soft key.
5. Use the dialpad to enter the new area
code at the prompt.