Filter
Top Products
Connect the IP Phone 2007 components
26
Connect the IP Phone 2007
components
Before you begin
Steps
1. Connect one end of the handset cord to the handset jack (identified
with a handset icon) on the back of the telephone. Connect the other
end to the jack on the handset.
2. Choose one of the following connections:
a. For a telephone not sharing LAN access with a PC, connect one
end of the CAT5 line cable to the LAN Ethernet port located on
the back of the telephone (identified with a LAN icon). Plug the
other end of the CAT5 line cable into the IP network.
b. For a telephone sharing LAN access with a PC, connect one end
of the CAT5 line cable to the LAN Ethernet port located on the
back of the telephone (identified with a LAN icon) and the other
end to the IP network. Insert a second CAT5 line cable into the
PC Ethernet port located on the back of the telephone (identified
with a PC icon) and the other end into the Ethernet port of the
computer.
CAUTION
Damage to Equipment
Do not plug the IP Phone 2007 into a regular
telephone jack. This results in severe damage
to the IP Phone. Consult your system
administrator to ensure that you plug your set
into a 10/100BaseT Ethernet jack.