Filter
Top Products
Connect the IP Phone 2007 components
27
3. Contact your installation technician for the proper power option. This
telephone can be powered by an optional AC adapter or using Power
over Ethernet.
4. Thread the cord around the strain relief, retaining hook, and channel
provided for a secure power connection.
5. Secure the telephone footstand to the telephone base. Use the angle
grip on the top back of the telephone to change position.
6. Contact your system administrator for configuration instructions.
Figure 5 shows connections on the IP Phone 2007.
Figure 5: IP Phone connections
WARNING
If using an AC adapter, you must use the
IP Phone 2007 Global Power Adapter (part number
N0014020) or your phone will fail to operate.