Filter
Top Products
28 First time installation of the Nortel IP Phone 1535
•
Enter either a 13-character alphanumeric encryption key or a
26-character hexadecimal encryption key with a “0x” prefix to
denote that a hexadecimal value is used.
WPA-PSK (TKIP):
•
Choose Authentication and select Use WPA-PSK.
•
Enter an 8- to 63- Character key.
d. Channel ID: Assign a manual value to specify the Wi-Fi channel
ID to be used in connecting the IP Phone 1535 to the wireless
network.
e. Encryption: WEP encryption key entry (see previous notes for
ESSID).
f. Authentication: WPA-PSK key entry (see previous notes for
ESSID).
—End—
After you successfully connect the IP Phone 1535 to the network using
the WiFi connection interface, you make both voice and video calls using
that interface and the LAN profile becomes disabled. So, in this example,
when you enable the WiFi connection profile, all voice and video calls made
using the IP Phone 1535 will now be made through the WiFi connection to
the network, and the LAN connection profile will be disabled (along with all
menu selections associated with configuring the LAN connection profile).
Modifying User Information parameters
After you have enabled either the LAN or WiFi connection profile and have
configured the settings to allow successful connection of the IP Phone 1535
to your local network, you can configure the IP Phone 1535 to find and
use the Voice Over IP (VoIP) services installed on your network. This is
done by accessing and modifying required parameters contained in several
configuration options on the VoIP Settings menu.
You can use the User Information configuration option (on the VoIP
Settings menu) to setup and configure specific user data required for
VoIP connectivity and use. The user data you enter will be used for client
identification while accessing connected VoIP services and for client
authentication (in registering the IP Phone 1535 with the VoIP network).
For successful registration of the Nortel IP Phone 1535 with the VoIP
services available on your network, you must access and configure the User
Information parameters as described below:
Multimedia Communications Server 5100
IP Phone 1535 Installation and Configuration
NN43160-103 01.02 Standard
Release 3.5 20 November 2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.