Filter
Top Products
22 First time installation of the Nortel IP Phone 1535
Physically installing the IP Phone 1535
Basic installation of the IP Phone 1535 consists of connecting to the
correct ports using the appropriate cables. You can now make the physical
connections for the handset and power, as well as attach the IP Phone
1535 to the included telephone stand, by following the procedures in the
following sections.
Installation guidelines
Consider the following conditions when you choose a location in which
to install the Nortel IP Phone 1535:
•
Use the IP Phone 1535 in an environment with a temperature range of
+0
to 40
C and a relative humidity of 5 to 95 percent.
•
Place the IP Phone 1535 on a smooth, non slip surface.
•
Do not install the IP Phone 1535 in a dusty environment. The buildup of
dust deposits can affect the functionality of moving parts.
•
Do not install the IP Phone 1535 in a location directly exposed to
sunlight or radiant heat sources; these can cause damage to electrical
components over time.
•
The IP Phone 1535 does not support Power Over Ethernet (PoE):
therefore, do not install the phone on a PoE configuration.
Connecting the handset
Connecting the handset to the Nortel IP Phone 1535 base:
Step Action
1
Insert one end of the coil cord into the handset connector port.
This port is on the handset cradle side of the IP Phone 1535. For
more information, see Figure 2 "IP Phone 1535 connection ports "
(page 17).
2
Insert the other end of the coil cord into the port on the handset.
—End—
Connecting the Nortel IP Phone 1535 to a power source
Connecting the Nortel IP Phone 1535 to a power source:
Step Action
1 Insert the power adapter DC plug into the DC power jack, at the rear
of the IP Phone 1535 phone base. For more information, see Figure
2 "IP Phone 1535 connection ports " (page 17).
Multimedia Communications Server 5100
IP Phone 1535 Installation and Configuration
NN43160-103 01.02 Standard
Release 3.5 20 November 2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.