5235 IP Phone SIP User and Administrator Guide
Change the Time and Date
Important: Use this procedure only if an SNTP server is not provided. If an SNTP
server is not available, you must reprogram these settings every time the
phone reboots.
1. Press Superkey, and then press >> until SETTINGS & OPTIONS? appears.
2. Press OK, and then press Next until TIME AND DATE? appears.
3. Press OK. SET TIME? appears.
4. Do one of the following:
• To change the time, press YES. 12 OR 24 HR FORMAT? appears. Proceed to
step
5.
• To change the date, press NO. SET DATE? appears. Proceed to step
9.
5. Do one of the following:
• To enter the time in a.m./p.m. format, press 12.
• To enter the time using the 24-hour clock, press 24.
6. Enter the time (for example, 1236 for 12:36; 0220 for 02:20), and then press
SUBMIT.
7. (For a.m./p.m. only) Press AM or PM. SET TIME? appears with the new time.
8. Press NO. SET DATE? appears.
9. Do one of the following:
• To change the date, press YES, and then proceed to step
10.
• To return to the main menu, press NO, and then proceed to step
11.
10. Enter the date (for example, enter 161204 for 16 December 2004), and then press
SUBMIT. SET DATE? appears with the new date.
11. Do one of the following:
• To return to the main menu, press NO.
• To return to the default display, press Superkey.
•
- 28 -