Filter
Top Products
Using Advanced Features
6. Click Apply to apply the changes.
Line Key Status
Shared lines display the following indicator lamps:
Line Status
Prime Line Key
Appearance
Description
Trying Highlighted
When a user initiates a call on a shared line, the Line Key
indicator for that line and all shared lines are highlighted.
Active Highlighted
When a call has been successfully connected, the Line
Key indicator for that line and all shared lines are
highlighted.
Held Flashing Quickly
When a user puts another party on hold, the Line Key
indicator of that line and all shared lines flashes quickly.
Alerting Flashing
When a call is incoming, the Line Key indicator of the
called line and all shared lines flashes.
RSS (Web) Feed
Web feeds are text formats used to deliver information that is frequently updated such
as News and weather reports. Your Mitel SIP Phone can act as a web feed reader,
displaying the feed on Line 1 of the phone display when the phone is idle. You can
program one or more keys on your phone to display a web feed or to display your own
customized message (branding). Use the
Key Programming Page in the Web
Configuration Tool to program one or more RSS Feed keys. For more information, refer
to the Web Configuration Tool Online Help.
Enable/Disable RSS Feed
Once an RSS Feed key is programmed, press the key to display the feed. The LED on
the key will light up and remain lit while the RSS feed scrolls continuously across Line 1
of your phone display. Press the key again to stop the feed.
Note: If your Administrator has programmed a global RSS feed or branding message
for your phone, this text will be displayed when your phone is idle. When one of
your own personal RSS Feed keys is enabled, it will override any global feed set
by your Administrator for your phone.
Time and Date
A Simple Network Time Protocol (SNTP) server (version 4 or later) provides your phone
with the date and time. Your Administrator configures your time zone once using the
Web Configuration Tool. Your phone automatically adjusts to Daylight Savings.
If an SNTP server is not available in your system setup, you can modify the time and
date using your phone or the Date/Time page of the Web Configuration Tool (see
Accessing the Web Configuration Tool on page 6). For more information, contact your
Administrator.
Note: You cannot change your time and date settings while on a call.
Note: If your phone loses power, the modified time and date are not saved.
- 27 -