Filter
Top Products
Note:
All function keys mentioned above (except dialing keypad) are effective only in IP
Phone mode.
Back View
n DC 9V: DC 9V power input outlet
o LAN: RJ-45 connector, connected directly to the Hub through the straight CAT-5
cable.
p PC: RJ-45 connector, connected directly to the PC through the straight CAT-5
cable
q Line: RJ-11 connector, connected directly to the PSTN analog line.
Note:
There are two LED indicated lights: LINK/ACT and 10/100 for LAN port and PC port.
When network status is regular, LED of LINK/ACT will light on; when IP-Phone is
transmitting or receiving data, LED will be flashing; when transmit rate is in 10 mbps or
100mbps, LED of 10/100 will light off or light on.
Specification of connector
Ethernet Port：
Ethernet port is for connecting IP-Phone to network, transmit rate supports 10/100 Base-T.
7