Filter
Top Products
4.3. [debug] command
This command is for engineers to debug system of IP-Phone. User can add debug flag via
command debug –add “debug flags”, and then start debug function via command
debug –open. When IP-Phone is working on screen will display related debug messages.
Most frequently used debug flag are “sip”, “fsm”, “msg”…etc.
4.4. [reboot] command
After typing commit command, type reboot to restart the IP-Phone .
Sometimes after user type reboot, on terminal screen will display: "Data modified, commit
to flash rom?” which means IP-Phone will record call history or not. (Ex. REDIAL, outgoing
and incoming call data)
4.5. [flash] command
This command will clean the configuration stored in the flash rom to default value and
reboot the IP-Phone .
Note:
● After user upgrade new software version, suggested to execute this command to make
sure new software work well on IP-Phone
● To execute the command flash –clean, all configuration of IP-Phone stored in flash will
be cleaned. It is authorized for the user whose login name is “root” only.
39