Filter
Top Products
side.
● HOLD: To hold a call, after press HOLD button, both sides will hear hold tone.
● SPEED:
1. Press SPEED and number (Phone book index) after off-hook can do speed dial
according to phone book data (please refer to 3.LCD configuration-6. Phone Book
or Advanced Configurations via 4.Telnet- 10.[pbook] command).
2. Switch input mode between character mode or digit mode, e.g., when user wants to
input phone number can press SPEED to switch input mode as digit mode; when
user wants to input name can also press SPEED to switch input mode as character
mode.
● FORWARD: Forward an incoming call to another IP device. (Please refer to LCD
configuration-Forward Type) (**)
● MESSAGE and its indicated LED light: When having missed incoming calls, the
MESSAGE LED will be flashing. User can check the information of missed calls by
pressing the MESSAGE button. (**)
● TRANSFER:
1. Transfer a call to the third site. When A and B are in communication, A wants to
transfer this call to C, A can press TRANSFER button, now B will hear hold tone,
and A will hear dial tone, then A can press phone number of C, after C picks up, A
can talk with C, after A hangs up, B and C can be connected.
Note:
1. A cannot press phone number of C before hearing dial tone.
2. If A press TRANSFER and number, press TRANSFER again can cancel
transferring and retrieve call with B.
3. If A press TRANSFER and number of C, C is ringing, press TRANSFER again C
will return to standby mode and A can retrieve call with B.
2. Change characters to be capital or lowercase: when pressing TRANSFER before
press letters can switch input type of letters.
● REDIAL: Redial the last outgoing call.
● + And -: Adjust the voice volume heard of communication.
● SPEAKER: Hand free mode. User can talk without picking up handset.
6