Filter
Top Products
● -ipsharing: If IP-Phone is behind a IP-sharing , user must enable IP sharing
function and specify public IP address.(ifaddr –ipsharing 0 / 1 “public IP address
of IP sharing” , 0 for disable and 1 for enable)
Note:
Some Proxy servers support endpoint behind NAT function, in this case
IP-Phone doesn’t have to enable IP sharing function, please contact with your
Proxy Server vendor.
● –upnp: enable / disable UPnP function. If the IP sharing or NAT device supports
UPnP, user can enable UPnP function so that IP-Phone will automatically connect
with NAT device without configuration in IP Phone and NAT device.
4.8. [time] command
When IP-Phone enable SNTP function and be able to connect with SNTP server, type time
command will show the current time retrieved from SNTP server.
4.9. [ping] command
Command ping can test which the IP address is reachable or not.
41