Filter
Top Products
3.3. System Configuration
Please refer to chapter 4.12 [sysconf] command
Keypad DTMF Type: set DTMF type. User can select DTMF type IP-Phone transmits.
RFC2833 Payload Type: change RFC2833 Payload type. This is for special request from
the other site, if RFC2833 payload types of 2 sites are different, it may cause some problem
of connection.
Inter Digit Time: Set the DTMF inter digit time (second)
To set the duration (in second) of two pressed digits in dial mode as timed out. If after the
duration user hasn’t pressed next number, IP-Phone will dial out all number pressed.
End of Dial Digit: select end of dialing key, e.g. set end of dial key as * button, after finished
pressing dialing number then press * will dial out.
28