Filter
Top Products
SP200/210 Maxon SP200/210 Radio
Issue 1.0 APPENDIX A - ACC-2003 INTERFACE BOX
03/01 Page 11-5
INTRIM
Adjusts the Mic audio in 0.5dB steps from -4dB to +3.5dB.
SATRIM1
Adjust the signal amplitude of DTMF in 0.5dB step from 0dB to 7.5dB
For the receiver the following parameters can be adjusted (see Figure 11-5):
Figure 11-5 - ASIC Control Screen (Rx)
INTRIM
Adjusts the demodulated audio at IF IC in 0.5dB steps from -4dB to +3.5dB.
SATRIM2
Adjusts the SAT tone received level in 0.5dB steps from +12 to +13.5dB.
RX VOL
Adjusts the received audio level to the audio IC in 2.5dB steps from mute to –37.5dB.
To write to EEPROM: Press F6 for ASIC data ONLY.
Press F5 for ASIC & Frequency data
Press ‘ESC’ to finish the program and close the window.