Maxon Telecom SP200 Two-Way Radio User Manual


 
SP200/210 Maxon SP200/210 Radio
Issue 1.0 TABLE OF CONTENTS
03/01 Page iii
TABLE OF CONTENTS
Page Number
1 INTRODUCTION 1-1
1.1 Using this Manual 1-1
1.2 Amendments to this Manual 1-1
1.3 Contact Information 1-2
2 SPECIFICATIONS 2-1
2.1 General 2-1
3 ACCESSORIES & OPTIONS 3-1
3.1 Pre-Install Check 3-1
3.2 Accessories 3-1
3.3 Options 3-1
4 INSTALLATION, COMMISSIONING & ALIGNMENT 4-1
4.1 Installation 4-1
4.2 Connections 4-1
4.3 Commissioning 4-2
4.3.1 Test Equipment Connection 4-6
4.3.2 Transmitter Performance Tests 4-6
4.3.3 Receiver Performance Tests 4-6
4.4 Power Adjustment 4-7
4.5 Alignment 4-8
4.5.1 Preparation 4-8
4.5.2 Disassembly and Re-assembly of the Radio 4-9
4.5.3 PLL Alignment 4-10
4.5.4 Squelch Sensitivity 4-11
4.5.5 Transmitter Alignment 4-11
4.5.6 Receiver Alignment 4-14
5 DETAILED FUNCTIONAL DESCRIPTION 5-1
5.1 Introduction 5-1
5.2 Common Circuits 5-1
5.3 Audio ASIC 5-2
5.3.1 Audio Signal Path 5-2
5.3.2 Sat Signal Path 5-3
5.3.3 Miscellaneous Signals and Controller 5-3
5.4 Audio/SAT Circuits 5-4
5.5 Common RF Circuits 5-5
5.6 Transmitter 5-7
5.7 Receiver 5-8
6 TROUBLESHOOTING 6-1
6.1 Diagnostic Function 6-1
6.2 Troubleshooting Chart 6-2
6.3 Voltage Charts 6-3
6.3.1 Transistors (Main Circuit) 6-3
6.3.2 Integrated Circuits 6-4
7 PROGRAMMING 7-1
7.1 SMP6100 7-1
7.1.1 Introduction 7-1
7.1.2 Getting Started 7-1
7.1.3 Programming 7-1