Filter
Top Products
Increasing the Number of Mailing Lists Allowed on the
System
Issue 1 July 1997
15
3. Ensure the following fields are set to ON:
■ Enhanced List Application
■ TCP/IP Administration
4. If either of these fields is OFF, and you purchased/installed ELA, call the
support center to request that the features be enabled for your Lucent
I
NTUITY platform.
5. Press (F6) to exit this window.
Increasing the Number of Mailing
Lists Allowed on the System
The following task contains instructions for the fields that relate directly to ELA.
See “Field Definitions: System-Parameters Limits Screen” in Chapter 3 of your
I
NTUITY
Messaging Solutions Administration
guide for complete field descriptions
and to understand their implications.
To administer AUDIX system limits to support ELA:
1. Starting from the main menu (Figure 3-1 on page 3-14), select:
2. At the enter command: prompt, enter either:
The system displays the System-Parameters Limits screen.
3. Tab to the Lists, Total Entries: field and enter 200000.
4. The Lists/Subscriber field has a default value of 100. If this setting
has changed, enter a value of 15 or greater.
If the default value has not changed, skip this step.
5. The Recipients/Lists field has a default value of 250. If this setting
has changed to less than the default, enter a value of 250.
If the default value has not changed, skip this step.
NOTE:
If there was an administrative reason for reducing the value in this
field, your system may not be able to support ELA. Review your
system configuration and business needs to determine the
implication of returning this setting to 250.
Full Command Version Short Command Version
change system-parameters limits ch sys li
CANCEL
> AUDIX Administration