Filter
Top Products
16
3. Do one of the following:
■ Press to accept the current start time.
■ Enter the start time using the 24-hour format of HHMM (where HH
represents the hour and MM represents minutes), followed by
.
Example: Enter
for the start time of 7:30 p.m.
The prompt says, “Enter Outcalling end time in the format
of... To skip, press #.”
4. Do one of the following:
■ Press to accept the current end time.
■ Enter the end time using the format shown in Step 3.
The system plays back the start and end time you have entered.
5. Either:
■ Press to approve the schedule.
■ Press to re-enter the schedule. Return to Step 3.
Modifying the Time Interval
Between Outcalling Attempts
The time interval is the number of minutes (from 5 to 99 minutes) the system
waits before it tries another outcall. The default is 15 minutes.
1. Press
to specify the time interval.
The system plays the current time interval between attempts. It also plays,
“The amount of time the system waits between attempts
can be from 5 to 99 minutes. Please enter the number of
minutes followed by #. If finished, press *#.”
2. Enter the time interval in minutes followed by
.