Filter
Top Products
59
INT4000 Cordless Telephone User Guide
MOVING ON
To perform a directory search:
1. Dial .
2. Press for the intercom directory, press for the outside directory, or press
for the feature directory.
3. Enter letters or numbers (up to 10 characters) as described below:
• Remain in alphanumeric mode: Press the dialpad buttons to enter the desired
characters. (See the chart below.) The number of times a button is pressed
determines which character is entered. For example, 77776444844 would
enter “SMITH.” When adjoining characters are located under the same but-
ton, press FORWARD once to advance to the next character. For example,
5666 FWD 66337777 would enter “JONES.” (Note that the letters corre-
spond to the letters printed on dialpad buttons 2-9.) Press FORWARD twice
to leave a space or press BACKSPACE to backspace.
NOTE: To use the BACKSPACE button, you must preprogram the feature
button (feature code 314) on your phone. Refer to Programming Your Feature
Buttons section on page 56 for details on how to program the BACKSPACE
button. Also, to use the FORWARD, PREVIOUS, NEXT, or MSG button, your
System Administrator must program them in Database Programming.
• Change to numeric mode: Press MSG and then press the dialpad buttons to
enter an extension number.
4. Press to begin the search.
To dial a number or feature code while it is displayed:
1. Press .
2. The display will time out if the number is not dialed.
3 0 7
1 2
3
#
#
NUMBER OF TIMES BUTTON IS PRESSED
BUTTON 1 2 3 4 5
1-&()1
2ABC'2
3DEF!3
4GHI*4
5JKL
# or /
*
5
6MNO
Ñ or #
*
6
7PQRS7
8TUV?8
9WXYZ9
0 @:.,0
*The character available depends on the software versio
n