Filter
Top Products
52
INT4000 Cordless Telephone User Guide
SPEED DIALING
Speed dialing allows you (and your System Administrator) to store frequently dialed
numbers for easy dialing. Each number is stored on your phone (Station Speed-Dial)
or in the phone system (System Speed-Dial) and is identified by a location number.
Once programmed, you can then quickly dial these numbers by entering a feature
code and dialing the desired location number. Because the Inter-Tel system supports
both Station and System Speed-Dial numbers, you can have access to over 1000
stored numbers.
Station Speed Dial
You can store up to ten personal speed-dial numbers and associated names in Station
Speed-Dial locations 0-9. If you have programmable feature buttons, you can also
create Station Speed-Dial buttons for one-touch speed dialing (see page 56).
Storing Station Speed-Dial Numbers
To program your Station Speed-Dial locations:
1. Dial .
2. Enter the location code 0-9 to be programmed.
3. Enter the desired name for the speed-dial number, as described below:
• Remain in alphanu-
meric mode: Press the
dialpad buttons to enter
the desired characters.
(See the chart on the
right.) The number of
times a button is pressed
determines which char-
acter is entered. For
example, 533266 enters
“JEAN.” When adjoin-
ing characters are
located under the same
button, press FOR-
WARD once to advance
to the next character. For example, 66 FWD 6667776 enters “NORM.” (Note
that letters correspond to the letters printed on dialpad buttons 2-9.) Press
FORWARD twice to leave a space. Press BACKSPACE to backspace.
3 8 3
NUMBER OF TIMES BUTTON IS PRESSED
BUTTON 1 2 3 4 5
1-&()1
2ABC'2
3DEF!3
4GHI*4
5JKL
# or /
*
5
6MNO
Ñ or #
*
6
7PQRS7
8TUV?8
9WXYZ9
0@:.,0
*The character available depends on the software versio
n