Filter
Top Products
FINDING YOUR WAY
9
INT4000 Cordless Telephone User Guide
Wall Mounting
You can mount your INT4000 either on a standard wall plate or directly on a wall.
Follow the instructions below.
Standard Wall Plate Mounting
Your INT4000 is designed to be mounted on a standard wall plate.
To attach the wall mount stand to the base unit:
1. Slide the wall mount stand into the notches at
the top of the base unit, rotate the wall mount
stand down and snap it into place, as shown on
the right.
2. If you haven’t done so, plug the AC adapter into
the base unit as previously described.
3. Place the AC adapter cord inside the molded
channel of the wall mount stand, as shown on
the right.
4. Plug one end of the telephone cord into the
LINE jack on the base unit. Then place the tele-
phone cord inside the molded channel(s) on the
bottom of the wall mount stand.
5. Plug the other end of the telephone cord into the
modular wall jack.
6. Place the base unit on the posts of the wall plate
and push down until it's firmly seated, as shown
on the right.
7. Plug the AC adapter into a standard 120V AC
wall outlet.
NOTE: Do not use an outlet controlled by a wall
switch. Turning the wall switch off will also turn
the base unit off.
WALL MOUNT STAND