Filter
Top Products
40
INT4000 Cordless Telephone User Guide
To enable DND:
1. Dial .
2. Dial the two-digit number corresponding to the message you want to use.
3. If desired, customize the second display line by dialing the desired numbers or
letters as described below:
• Remain in numeric mode: Press the dialpad buttons to dial the desired num-
bers. Press for a hyphen (-) or press for a colon (:). Press FOR-
WARD once to enter a space, or press BACKSPACE if you need to
backspace.
• Change to alphanumeric mode: Press
MSG and then press the dialpad but-
tons to enter the desired characters. (Note that letter correspond to the letters
printed on the buttons 2-9.) The number of times a button is pressed deter-
mines which character is entered. For example, 33377744432999 enters
“FRIDAY.” When adjoining characters are located under the same button,
press FORWARD once to advance to the next character.
For example, 6
FWD 666 FWD 6632999 enters “MONDAY.” Press FORWARD twice to
leave a space or press BACKSPACE if you need to backspace.
NOTE: To use the BACKSPACE button, you must pre-program the feature
button (feature code 314) on your phone. Refer to Programming Your Feature
Buttons section on page 56 for details on how to program the BACKSPACE
button. Also to use the FORWARD, PREVIOUS, NEXT, or MSG button, your
System Administrator must program them in Database Programming.
4. Press .
To cancel DND mode:
Dial .
3 7 2
#
*
NUMBER OF TIMES BUTTON IS PRESSED
BUTTON 1 2 3 4 5
1-&()1
2ABC'2
3DEF!3
4GHI*4
5JKL
# or /
*
5
6MNO
Ñ or #
*
6
7PQRS7
8TUV?8
9WXYZ9
0@:.,0
*The character available depends on the software version.
TALK
3 7 2