Filter
Top Products
16
GETTING STARTED
Axxess
®
Model 8620 Phone User Guide – Axxess IP Mode
Outside Calls
With outside calls, you can talk to people who aren’t members of your phone system.
When you make an outside call, however, you must dial any area codes or long dis-
tance digits that your telephone company requires.
Placing Outside Calls
To place an outside call:
1. With or without the handset lifted, press .
2. Dial the desired number.
NOTE: If you see a request for an account code and hear a single beep, you must
dial an account code before you can place your call (see page 51).
Depending on how your system is programmed, you may be able to use one of the
following methods to select an outgoing line, instead of pressing the but-
ton:
• Dial the Outgoing Call feature code (default is ).
• Press an unlit button, if you have one.
• Dial a Select Line Group feature code (the defaults are 92001-92208).
• Dial the Automatic Route Selection (ARS) feature code (the default is 92000).
NOTE: Check with your system administrator to see if your system uses custom-
ized feature and access codes.
To request a callback (queue on to the line) if all outgoing lines are busy when you
try to call out:
When you hear busy signals, press and hang up. When the line is available, your
phone rings.
To cancel the queue request before your phone rings:
Press
.
When dialing the number, you can do one of the following:
• Use the speed-dial directory. See page 55.
• Use the Station Speed-Dial feature. See page 46.
• Use the System Speed-Dial feature. See page 48.
• Redial the last number you dialed. See page 24.
OUTGOING
OUTGOING
8
CALL
6
6