Filter
Top Products
Chapter 5: Additional Information
- 48 -
Clearing Memory
When you initialize Holux GPSmile 60, it returns to the status when it was
purchased.
When you initialize Holux GPSmile 60, all data stored in the
memory is deleted. Holux GPSmile 60’s initially installed
programs are not deleted.
Before the initialization, remove the SD card.
1. Turn off Holux GPSmile 60.
2. Press and hold the power buttons,
Program button 3 (p17) and Program
button 4(p17),
meanwhile, use the stylus to press the reset switch on the
back side of Holux GPSmile 60.
3. Release the Power buttons.
4. When a screen appears, release the reset switch. When the initialization
is complete, the Welcome screen appears.
5. Follow the on-screen instructions to set up the device.
Specifications
Item Description
External dimensions
(L x W x H)
Approximately
(121 x 71.8 x 17~22 mm)
Weight
Approx. 160 +/- 5g
Operating conditions
CAUTION