Holux GPSmile Pocket PC PDAs & Smartphones User Manual


 
Chapter 2: Basic Skills
- 22 -
Charging through Active Sync cable
Please use Active Sync cable when you have to synchronize your device
and your computer while charging your device via miniUSB. When you use
Active Sync cable to establish connection between your device and the PC,
plug the miniUSB connector of the AC Adaptor into miniUSB charger
located at the middle of Active Sync cable to start charging.
Prolonging the Battery Life
Use Holux GPSmile 60 with the AC adapter during the following high
power consumption conditions:
In addition:
Select the short power-off time in the setting menu to shorten the
amount time and Holux GPSmile 60 remains on if it is not used.
Turn off the screen light.
Set the screen brightness to the power saving mode and shorten
the light turn-off time.
Use Holux GPSmile 60 with an ambient temperature between
59°F and 77°F (15°C and 25°C). This temperature range is the
most effective for the battery.
When you use Holux GPSmile 60 in high or low temperature
environments, the operable time is shortened due to the
decrease of the battery capacity.
The removable battery has a limited life. Repeated
charging/discharging of the battery gradually decreases the operable
time. When the operable time has been diminished, it is time to replace
the removable battery with a new one.
Do not leave Holux GPSmile 60 in a place of high or low temperature. It
may shorten the battery life.
If you have not used Holux GPSmile 60 for several days, its
battery charge level reading may be inaccurate. Fully
recharge the battery before using.
CAUTION