Filter
Top Products
GXV-3000 User Manual Grandstream Networks, Inc.
- 18 -
4.3.5 Receiving Calls
There are three states when GXV-3000 receives a call:
1. When receiving an initial call. Besides ringing with selected Ring Tone, the corresponding ac-
count LINE will flash in red, taking Handset/SPEAKER/Headset off hook will enable user to
hear the calling party in Handset/SPEAKER/Headset.
2. When receiving second or more incoming calls, besides playing stutter Call Waiting tone,
GXV-3000 will pick up the corresponding account LINE or the next available LINE as de-
scribed in section 4.3.2.
3. When the related configuration is enabled for Paging/Intercom and the PBX (or Server) also
4. supports this feature, the phone will beep once and automatically establish the call via
SPEAKER.
4.3.6 Call Hold
While in conversation, pressing the “HOLD” button will put the other party on hold. User can resume
the conversation by pressing the corresponding blinking LINE. User will also automatically put the
current line on “HOLD” by pressing another available LINE for making or receiving other phone calls.
4.3.7 Call Waiting and Switch between Calls
GXV-3000 can switch to another line for making or answering calls and automatically put an ACTIVE
call on Hold.
When receiving second or more incoming calls, besides playing a stutter Call Waiting tone, GXV-3000
will pick up the corresponding account or the next available LINE as described in section 4.3.2.
4.3.8 Call Transfer
GXV-3000 supports both BLIND and ATTENDED (or SUPERVISED) Transfer:
1. Blind Transfer: When a LINE is “ACTIVE”, user will get a dial tone by pressing the “TRNF”
button, then dial the number and press the “SEND” button, this will transfer the other party in
the corresponding LINE to the dialed number.
2. Attended (or Supervised) Transfer: When in conversation with an “ACTIVE” LINE as defined
in section 4.3.2, user shall press “Linex” button to make a call and thus automatically puts the