Filter
Top Products
Rino
®
120 Owner’s Manual 79
UNIT OPERATION > SETUP PAGES
System Setup Page
The System Setup Page allows you to change GPS
operation modes, use the WAAS capabilities, turn the
Message Beep on or off, and choose the battery type. See
the “Appendix” for WAAS capability information.
To access the System Setup Page:
1. Press the Page key or the
Menu icon to open the
Main Menu.
2. In the Main Menu, scroll
down and select Setup.
3. Select the System icon to
open the System
Setup Page.
The Option Menu allows you restore defaults or
display the current version of unit operating software and
the Unit I.D. Number. Software updates and instructions
for downloading are available from the Garmin Web site
(www.garmin.com).
Choose one of the four GPS options other than Normal
to significantly save battery power. The Battery Saver
mode reduces the rate of satellite signal position updating
and the GPS Off option stops satellite signal reception
altogether. The Demo Mode simulates navigation.
To
change the battery type:
1. Use the Thumb Stick to highlight the Battery
Type field and then press In.
2. Then use the Thumb Stick to select the desired
option and press In.
System Setup Page