Filter
Top Products
Rino
®
120 Owner’s Manual 67
UNIT OPERATION > PROXIMITY PAGE
Proximity Page
The Proximity Page lets you define an alarm circle around
a stored waypoint/contact position, and can be used to
help you avoid dangerous areas or to alert you when you
have strayed too far away from other Rino users. Up
to ten waypoints may be listed, with a maximum alarm
radius of 99.99 nautical or statute miles or kilometers.
If entering a proximity alarm circle, a “Near Proximity
Point <name>” message appears. If leaving a proximity
alarm circle, a “Leaving Proximity Point <name>”
message appears.
To access the Proximity Page:
1. Press the Page key or the Menu icon to open
the Main Menu.
2. In the Main Menu,
scroll down and
select Proximity.
To add a proximity point:
1. Use the Thumb Stick to highlight an empty space
on the Proximity list and press the Thumb Stick
In to display the Find ‘N Go screen. Highlight an
item from the list and press the Thumb Stick In to
open the item.
2. From the Review Page, select Use. Press In again
to begin entry of the proximity radius. Use the
Thumb Stick to enter a distance and press In.
To clear one or all proximity point(s) from the
list:
1. To clear a single alarm, use the Thumb Stick to
highlight the proximity point to clear and press In.
Choose Remove and press In.
2. To clear all proximity waypoints, highlight the
Option Menu and press In. Choose Remove
All and press the Thumb Stick In.
To turn proximity alarms on or off:
1. Use the Thumb Stick to highlight Proximity
Alarms and press In to place a check mark.
Proximity Waypoints Page