Filter
Top Products
40 Rino
®
130 Owner’s Manual
UNIT OPERATION > ALTIMETER PAGE
Viewing Points
The View Points option allows you to scroll through the
stored elevation profile and to view a single point along
the profile. When the pointer is stopped at a location
along the profile, the display shows the elevation, time of
day and date the point was created.
View Points Option Page
To use the View Points option:
1. Use the Thumb Stick to access the Option Menu.
2. Highlight the View Points option and press the
Thumb Stick In to display the View Points Page.
3. Move the Thumb Stick Right or Left to scroll the
profile past the pointer in the center of the page.
As the profile moves past the pointer, the status
window at the top of page changes to display the
date, time, and altitude for the point beneath the
pointer.
Resetting Data
You can reset the elevation data and the maximum
elevation data by selecting the Reset option from the
Altimeter Page Option Menu .
To reset the elevation data and max elevation
fields:
1. Use the Thumb Stick to highlight the Reset
option from the page Option Menu and press the
Thumb Stick In to display the Reset page.
2. Use the Thumb Stick to highlight the reset
options on the page and then press the Thumb
Stick In to place a check mark in the box next to a
selected item.
3. Move to the Apply button and press the Thumb
Stick In to reset the data fields.