Filter
Top Products
Rino
®
130 Owner’s Manual 41
UNIT OPERATION > ALTIMETER PAGE
Calibrating the Altimeter
You must calibrate the altimeter to ensure that the
altimeter displays the most accurate elevation data. To
calibrate the altimeter, you must know the elevation or
barometric pressure at your current location. You can get
elevation information from a map or other reliable source.
You can learn the current barometric pressure (pressure
calibrated to sea level) by listening to NOAA weather
forecasts or a reliable local weather forecast on your
Rino 130.
To calibrate the altimeter manually:
1. Use the Thumb Stick to access the Option Menu.
2. Highlight the Calibrate Altimeter option and press
the Thumb Stick to display the Calibration Page.
3. At the message asking “Do You Know The Correct
Elevation?” highlight the on-screen Yes button and
press the Thumb Stick In to enter your elevation.
When finished, highlight OK and press it In to
return to the Altimeter Page.
Or At the message asking “Do You Know The Correct
Pressure?” highlight the on-screen Yes button and
press the Thumb Stick In to enter the barometric
pressure. When finished, select OK to return to
the Altimeter Page.
Programming Data Fields
The two user-selectable data fields support this page and
can be programmed to display the data options listed to
the right.
To program a data field:
1. Use the Thumb Stick to highlight the desired data
field and then press it In to open the data field
option pop-up window.
2. Use the Thumb Stick to move Up or Down the
menu to highlight a desired data option and then
press In to place it in the data field.