Filter
Top Products
32 Rino
®
130 Owner’s Manual
UNIT OPERATION > NAVIGATION PAGE
Navigation Page
The Navigation Page provides active guidance with a
rotating compass ring that shows your course (track)
while you are moving and a bearing pointer to indicate
the current direction to your destination (bearing) relative
to the course.
The Data Field at the top of the page, by default shows
you the name of your destination. All five Data Fields can
be programmed to display a variety of navigation data.
The list of data field choices may be found on page 28
and definitions may be found in the “Appendix.”
The Compass Ring functions as a magnetic compass
when you are stationary. When you are moving, the
heading is controlled by the GPS receiver (based upon
settings customized in the Heading Setup Page).
Times to
Destination
Straight Line
Distance to
Destination
Selectable
Data Fields
Bearing
Pointer
Compass Ring
Destination Name
(Waypoint)
NOTE: The Compass should be calibrated for the
greatest accuracy. Refer to page 36 for information
on calibrating the compass.
Using the Navigation Page
The two main components of the Navigation page are the
Bearing Pointer and Compass Ring. The Bearing Pointer
always points directly to the destination, no matter what
your current location might be. The Compass Ring
displays your heading.