Ericsson 230 Cordless Telephone User Manual


 
Not
f
or Comm
e
r
c
ia
l
Use
E
ricsson Mobile
Com
m
unic
a
t
i
ons A
B
Extra features 61
To switch the direct call on:
Route:
Handset » DirectCall
1. Select
DirectCall
and press YES.
Enable Direct Call?
is displayed.
2. Press
Yes
to confirm.
DirectC.No:
is displayed. If a direct call number has been set before, this is
shown in the display.
3. Enter the direct call number with the number keys (
CLR = delete; UP =
move left;
DOWN = move right; press for one second = dial tone pause).
4. Press
YES to confirm.
The direct call function is now on.
If direct call is on,
Direct Call
and the number are displayed. To call it, press any
key on the handset. You can still make an emergency call without first switch-
ing off direct call. See “Emergency call” on page 59.
Switching the direct call off
If you want to switch off the direct call feature, it is important not to wait too
long between the steps: otherwise the direct call number is dialled.
To switch the direct call off:
Route:
Handset » DirectCall
1. Press UP or DOWN to enter the menu and then quickly scroll to
DirectCall
and press
YES.
Disable Direct Call?
is displayed. If you do not react within two seconds, the
direct call number is dialled.
2. Press
YES to confirm.
The direct call function is now off.
You can prevent certain numbers from being called from a handset by block-
ing those numbers in the base station. You can still receive incoming calls.
You can switch call barring on and off in the handset. Call barring in the hand-
set is off by default.
If you call a blocked number, the line always sounds busy.
Some telephone numbers, such as emergency numbers, cannot be barred.
Please consult your dealer for more information.
You can also have call barring via your telephone operator. It remains in effect
irrespective of the call barring settings of the handset and base station. Please
consult your dealer for more information.
CALL BARRING
Direct Call
0201300571
CalledNumber
is barred