Ericsson 230 Cordless Telephone User Manual


 
Not
f
or Comm
e
r
c
ia
l
Use
E
ricsson Mobile
Com
m
unic
a
t
i
ons A
B
60 Extra features
To activate the baby phone:
Route:
Handset » BabyPhone » Activate
1. Select
Activate
and press YES.
BabyPhone
or
BabyPhone Call Failed
is displayed. In the latter case, either the
phone number of the other end is incorrect or the other end is out of range.
2. Wait for a connection and place the handset somewhere in the baby’s
room.
You can end a baby phone call by pressing
NO.
Baby phone call number
You can change the baby phone call number which is the internal telephone
number of a handset you want to select as the other end.
To set the baby phone call number:
Route:
Handset » BabyPhone » SetPhoneNo
1. Select
SetPhoneNo
and press YES.
The current baby phone number is displayed.
2. Enter the internal telephone number of the handset to be used as the other
end (
CLR = delete).
3. Press
YES to confirm.
The baby phone call number is set.
Information tone
If the baby phone call is activated, the other end hears an information tone
every half a minute to confirm that it is working (default). You can switch off
the information tone if needed.
To enable or disable the information tone:
Route:
Handset » BabyPhone » InfoTone
1. Select
InfoTone
and press YES.
The current setting is displayed.
2. Use the
UP or DOWN key to select the setting you want.
3. Press
YES to confirm.
The information tone setting has been changed.
You can set the handset so that pressing any key dials a certain number. This
means that if any key is pressed, for example by a small child, the same direct
call number is always dialled.
Switching the direct call on
Direct call deactivates the automatic key lock. For information about auto-
matic key lock, see “Blocking handset keys” on page 53.
DIRECT CALL