Filter
Top Products
Not
f
or Comm
e
r
c
ia
l
Use
E
ricsson Mobile
Com
m
unic
a
t
i
ons A
B
Personalizing the base station 47
Setting the number of rings
You can also set the number of times a handset rings before the next handset
starts to ring.
To set the ring count:
Route:
BaseStation » Basic » RingOrder » Delay
1. Select
Basic
and press YES.
PIN:
is displayed.
2. Enter the PIN code for the base station (see page 58) and press
YES.
3. Select
Delay
and press YES.
The current setting is displayed (the default is 3 times).
4. Enter the number of times a handset should ring (1 - 9).
5. Press
YES to confirm.
The number of rings is stored.
If you are engaged in an internal call with another handset and an external call
is received, you can be notified by two short beeps in your earpiece at regular
intervals. You can either finish the current call or put the current call on hold
to answer the external call. You can enable or disable this call waiting
function.
To set the call waiting function:
Route:
BaseStation » Access » CallWaiting
1. Select
Access
and press YES.
PIN:
is displayed.
2. Enter the PIN code for the base station (see page 58) and press
YES.
3. Select
CallWaiting
and press YES.
The current setting is displayed (default is
Off
).
4. Use the
UP or DOWN key to select the setting you want.
5. Press
YES to confirm.
The call waiting notification setting is changed.
See also “Receiving a second call” on page 30.
The priority phone feature allows you to be reachable by phone even when
you are out of range of the base station. When you are in range, calls are
routed to your handset. If you are out of range for certain period of time, calls
can be routed to a GSM phone or a voice mailbox, for instance.
If you enable this feature, the base station scans for your handset at regular
intervals. If it cannot locate the handset, it calls a certain telephone network
service to activate a diverted telephone number. As soon as the handset is
CALL WAITING NOTIFICATION
PRIORITY PHONE