Filter
Top Products
25
MODEL 6081-P pH/ORP SECTION 8.0
PROGRAMMING THE TRANSMITTER
SECTION 8.0
PROGRAMMING THE TRANSMITTER
8.1 General
8.2 Changing Start-up Settings
8.3 Choosing and Configuring the Analytical Measurement
8.4 Choosing Temperature Units and Manual or Auto Temperature Compensation
8.5 Setting a Security Code
8.6 Making HART-Related Settings
8.7 Resetting Factory Calibration and Factory Default Settings
8.8 Selecting a Default Screen and Screen Contrast
8.9 Choosing a Display Timeout
8.1 GENERAL
This section describes how to program the transmitter using the keypad.
1. Select the measurement to be made (pH, ORP, or Redox).
2. Choose temperature units and automatic or manual temperature mode.
3. Set a security code.
4. Make certain settings relating to HART communication.
5. Resetting factory default settings.
6. Selecting a default display screen and adjusting screen contrast.
8.2 CHANGING START-UP SETTINGS
When the Model 6081 is powered up for the first time, startup screens appear. The screens prompt the user
to enter the measurement being made, to identify the sensor being used, to select automatic or manual pH
correction and to select temperature units. If incorrect settings were entered at startup, enter the correct set-
tings now. To change the measurement, refer to Section 8.4.