DeWalt SBX IP 320 IP Phone User Manual


 
1-4 Connecting Your Phone
Chapter 1: Introduction
SBX IP 320 Phone User Guide
Connecting Your Phone
Connecting a Digital Phone
The diagram and information below apply to both the Twenty-four and Eight
Button Digital Phones.
A - Connect the telephone cord (curly cord) to the
handset and the other end to the handset jack
at the bottom of the telephone.
B - Connect the line cable to the port at the bottom
of telephone and the other end to the wall
socket.
C - Connect the Headphone to the headphone jack.
Connecting Your Single Line (SLT) Phone
The connection process for an SLT phone may vary from model to model. You
can use the above information as a general guideline. However, if you have
any problem or questions getting the connections made properly, contact your
System Administrator or refer the manufacturer’s user guide provided with
your phone