Filter
Top Products
Using Features and Functions 4-15
Chapter 4: Using a Single Line Telephone (SLT)
SBX IP 320 Phone User Guide
Paging
Pages must be made using the handset.
Note: Your station may or may not allow you to page (either internal or
external zone paging). However, even if you cannot initiate a page
from your station you may still answer a Meet-Me Page
announcement. Contact your System Administrator to find out if you
have any paging features available on your phone.
There are 4 ways to initiate a page: External Page, Internal Zone Page, All Call
(System) Page, and Meet-Me Page.
Sending a Page
1. Lift the handset.
2. Dial the appropriate page zone number (see "Paging Options" below).
3. Make the announcement.
4. Hang up.
Paging Options
Review the procedure for Sending a Page, using one of the following options
below:
545 = External Paging
You can send a page to an external paging and/or amplifier system (such as
out in a warehouse or outdoor area).
Dial 545 to make an External Page.
501 through 510 = Specific Internal Zone Paging
Internal Zone Paging allows you to page a particular group of phones (such as
only those phones in the front office or sales office areas).
Dial the specific zone to which you want to send a page (zones are 501
through 510)
(continued on next page)