Filter
Top Products
Setting Up the Mobile Computer
12 Pegaso™ Industrial PDA with Windows
®
CE
3. Create a pairing by double tapping the listing for the device you want and
selecting the service. If you want to specify encryption or require authen-
tication, enable the appropriate checkbox.
4. Tap
OK to complete.
For detailed instructions, reference the PRG.
Connecting to a PC
In order for the Pegaso to communicate with a host PC, Microsoft® ActiveSync
must be installed on the computer. Go to www.microsoft.com/downloads/ for
information. Reference the Pegaso PRG for detailed instructions.
IP Network Setup
1. Select Start > Settings > Network and Dialup Connections.
2. Double-tap on the item (varies based on the radio installed and the num-
ber of connections).
3. Complete the two tabs (shown in
Figure 6):
Figure 6. Modifying Network Connection Settings.
• IP Address: Select DHCP or set static IP settings.
•
Name Servers: If using static IP, set DNS and WINS servers.
RF Setup (Summit Client Utility)
The Summit Client Utility (SCU) is an application designed for users and
administrators of mobile devices that use a Summit radio module. Using SCU,
you can:
• Disable and enable the radio (turn it off and on)
• View the contents of configuration profiles, or configs, each of which
houses the RF, security, and other settings for the radio
• Select the config to be used to connect to a WLAN
• View global settings, which apply to every config