Vertical Communications SCS 8312S Telephone User Manual


 
Other Features GCA70-245
74 Comdial August, 03
7.5 Do Not Disturb Condition
You can set your telephone to a do not disturb mode using the desig-
nated interactive or programmable button. The associated indicator
turns on as an indication of active DND and an appropriate message
appears in the display of LCD speakerphones. Under the DND con
-
dition, an outside call forwards to another station according to the call
forwarding feature. An intercom number call doesn’t ring a DND
station and the system sends a fast busy signal to the caller to distin
-
guish the DND condition from a standard busy line. No paging
announcements are received on the DND station. Even though your
station is in the DND mode, you can still make outgoing calls and
access other features.
• To enable DND, proceed as follows:
1. SELECT OPTIONS.
2. SELECT NEXT until the DND
option appears.
3. SELECT DND.
4. SELECT ON.
5. SELECT EXIT.
6. PRESS SPEAKER to end.
• To disable the DND condition,
—REPEAT the above procedure, BUT
SELECT OFF instead of ON at step
4.
• To set a Do Not Disturb
condition at your telephone
when a call rings at your
station,
1. Hear ringing and notice incoming call information in display.
2. PRESS programmed DO NOT DISTURB button. (See Feature But-
tons section on page 62 for programming instructions.)
Setting Do Not Disturb
Station with DND Set