Filter
Top Products
DSUII Attendant User’s Guide
August, 03 Comdial 49
4.6 Call Forward Outside System
(CFOS)
The Call Forward Outside System (CFOS)* feature allows you to
forward incoming or transferred line calls to telephone numbers that
are outside the system. The CFOS feature forwards calls over any
available outbound lines or line groups. Since CFOS involves out
-
bound calls, those calls are subject to all line access and toll
restriction normally imposed on your calls.
You activate or deactivate CFOS by dialing a feature code or pressing
a preprogrammed button. Once you activate CFOS, you select the
outbound line or line group in any of the normal line selections
methods. You also designate the forward destination by dialing the
number or pressing a speed dial button. (If you do not make a line and
destination choice, the system uses the most recently used selections.)
• To activate the CFOS feature,
1. PRESS INTERCOM *07.
2. PRESS the speed dial button programmed with the target number, OR
SELECT a line AND DIAL number (max 16 digits).
3. PRESS HOLD for Pause OR PRESS TAP for Flash.
4. PRESS SPEAKER to end.
• To deactivate the CFOS feature,
—PRESS INTERCOM #07.
* Comdial has taken reasonable step in the design of all product features,
including CFOS, which protect against unauthorized or fraudulent access
to, or use of, a system, or which protect against unauthorized, fraudulent or
unaccounted-for access to, or use of, long distance lines. However, no sys
-
tem is entirely invulnerable or immune from unauthorized or fraudulent
access or use, or unaccounted-for access or use, and therefore Comdial dis
-
claims any and all liability, and makes no warranty, express or implied,
relating to unauthorized or fraudulent access or use, or unaccounted-for
access or use.
NOTE: CFOS must be initiated by installer programming.