Vertical Communications SCS 8312S Telephone User Manual


 
rogramming GCA70-245
58 Comdial August, 03
6.2 Autodial And Speed Dial Numbers
Automatic dialing is a feature that lets you store and dial frequently
called numbers using one or two buttons. You can store numbers for
speed dialing at any programmable button that is not now assigned as
a line button or other feature by the system administrator or installer
or at the keypad numbers.
Autodial and speed dial buttons can store up to 16 digits plus an
intercom or line selection. Stored digits include 0–9, S and #. The
system stores a pause at any point where the HOLD button is pressed,
and stores a hookflash at any point where the TAP button is pressed.
Outside numbers and feature codes are commonly referred to as
autodial numbers when stored at the programmable button locations;
however, they are referred to as personal speed dial numbers when
stored at the 10 keypad number locations.
• To store an outside number or a feature code as an
autodial or speed dial number, follow the display
prompts and proceed as follows:
1. SELECT OPTIONS.
2. SELECT NEXT until ADIAL and
SDIAL is displayed.
3. SELECT ADIAL to choose autodial
programming, OR SDIAL to choose
speed dial programming.
NOTE: The Federal Communications Commission (FCC)
requires that when programming emergency numbers and (or)
making test calls to emergency numbers:
1. Remain on the line and briefly explain to the dispatcher the
reason for the call;
2. Perform such activities in the off-peak hours, such as early
morning or late evening.
A
DIAL
S
DIAL
NEXT
Choosing Mode