Filter
Top Products
Do Not Disturb Condition
This feature keeps calls from ringing at your LCD speakerphone and makes your
station appear to be busy to intercom calls. As a reminder, a station that is set in
Do Not Disturb mode will display this information on the LCD.
•
To enable DND, proceed as follows:
1. SELECT
OPTIONS
.
2. SELECT
Programming.
3. SELECT
Do Not Disturb
.
4. SELECT
Do Not Disturb
interact button to
toggle between
ON
and
OFF
.
5. SELECT
EXIT
.
•
To disable the DND condition,
1. REPEAT the above procedure, BUT SELECT
OFF
instead of
ON
at step 4.
•
To set a Do Not Disturb condition at your telephone when a
call rings at your station,
1. Hear ringing and notice incoming call infor-
mation in display.
2. SELECT
OPTIONS
.
3. SELECT
Programming.
4. SELECT
Do Not Disturb
.
5. SELECT
Do Not Disturb
interact button.
Ringing will stop, caller will hear the do not
disturb tone, and your telephone will remain in
DND until you disable the feature (described
above).
6. SELECT
EXIT
.
Large Screen Display Speakerphone Station User’s Guide 69
GCA70-349 Other Advanced Features
Background Music
PREV NEXT
EXIT
VoiceAnnounceBlock
Do Not Disturb
Contrast Level
1
OFF
ON
6
Background Music
PREV NEXT
EXIT
Voice Announce Block
Do Not Disturb
Contrast Level
1
OFF
ON
6