Vertical Communications and FXT Conference Phone User Manual


 
Camping On - Busy Station,
Automatic Callback
If you call another station and receive a busy signal or a Do Not Disturb tone, you
can press a button that will cause the system to ring your telephone when the station
is available. This is called camping on at a station.Please note that you can camp
on to only one station at a time.
To camp on at any busy station,
1. SELECT
Camp-On
.
2. Your telephone immediately hangs up. When
the station you called becomes available, your
telephone will ring with five short tone bursts.
When you hear five short tone bursts,
1. PRESS INTERCOM OR SELECT
Answer
.
The other telephone will start ringing.
NOTE: If you do not press INTERCOM after the ring back tones within the
time limit set by the installer, the call back is canceled.
To cancel the call back before your
telephone sounds the tone bursts,
1. PRESS INTERCOM AND DIAL #6 OR
SELECT
CLEAR
.
To camp on at a station with a Do Not
Disturb condition set,
1. SELECT
Camp-On
. A call back will occur
when called station is no longer set in the Do
Not Disturb mode.
Large Screen Display Speakerphone Station User’s Guide 33
GCA70-349 Making Calls
Wednesday 19 11:36am
J Doe Ext 321 Is Busy
CAMP On
Voice Mail
Message
Wednesday 19 11:36am
Camp-On J Doe
VMAIL OPTIONS
CLEAR