Filter
Top Products
Response Message Button
You may program a RESPONSE MESSAGE button, which allows you to send
an LCD message to a caller who has initiated a SOHVA or intercom call from
another LCD speakerphone, or to send an LCD message to another LCD
speakerphone that you call and receive a busy signal or no answer.
•
To store a fixed RESPONSE MESSAGE button (delivers the
same message each time it is pressed),
1. SELECT
OPTIONS
.
2. SELECT
Programming
.
3. SELECT
NEXT
until the
Feature Button
option appears.
4. SELECT
Feature Button
.
5. SELECT the programmable button you wish to use as a response
message button.
6. SELECT
NEXT
until the
Response Message
option appears.
7. SELECT
Response Message
.
8. SELECT from the list of displayed messages. SELECT
NEXT
to
scroll through the list of messages. If you use the Back at or Call
options add to them as follows:
•
For Back at message, dial the code for the time numbers
and colon from dialing codes table.
For example, dial
#0001290405
for time 01:45.
•
For the Call message, dial the code for telephone number
where you can be reached.
For example, dial
#090708150202
0000
for number 978-2200).
9. REPEAT steps 5 through 8 for other features, OR SELECT
EXIT
to end programming.
66 Large Screen Display Speakerphone Station User’s Guide
Programming GCA70-349