Vertical Communications and FXT Conference Phone User Manual


 
Your Speakerphone’s Display Lights
The lights (LEDs) on your LCD speakerphone indicate the status of lines,
features, and intercoms.
Busy Lamp Field (BLF) lights (next to a Direct Station Select/Busy
Lamp Field or DSS/BLF programmable button):
Steady red = station is in use.
Flashing red = station is receiving a call.
Winking/Fluttering red = message-waiting light set for you by station
associated with that DSS/BLF button.
Next to a line button:
Steady green = this is your line, either on-hook (in a hands free mode) or
off-hook, when the line is active.
Steady red = another station is using this line.
Flashing red = a call is coming in on this line.
Flashing orange = this line will be answered when you lift the handset.
Winking green = your line is on hold.
Winking red = the call has been placed on hold by another station.
Fluttering orange or green = your line has recalled from hold.
Fluttering red = the line put on hold by another station has recalled.
NOTE: You can find the programmable buttons that the installer designates
line buttons in the same location as the DSS/BLF buttons. Ensure that these
buttons are labeled correctly to indicate their unique features.
Next to a fixed feature or programmable feature button:
Steady red = the feature is on.
Steady off = the feature is off.
NOTE: You can find the programmable buttons that the installer designates
feature buttons through user programming in the same location as the
DSS/BLF programmable buttons. Ensure that these buttons are labeled cor
-
rectly to indicate their unique features.
Large Screen Display Speakerphone Station User’s Guide 11
Getting Started GCA70-349