Filter
Top Products
4-13
Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Software Configuration Guide
OL-16191-01
Chapter 4 Configuring Voice
Configuring Calls
SUMMARY STEPS
1. enable
2. configure terminal
3. voice-port slot-number/port
4. caller-id enable [type [1|2]]
5. voice-port slot-number/port
6. caller-id enable [type [1|2]]
7. exit
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
VG# enable
Enters privileged EXEC mode.
Step 2
configure terminal
Example:
VG# configure terminal
Enters global configuration mode. You have entered
global configuration mode when the prompt changes to
VG(config)#.
Step 3
voice-port slot-number/port
Example:
VG(config)# voice-port 0/0
Enters voice-port configuration mode.
Step 4
caller-id enable [type [1|2]]
Example:
VG(config-voice-port)# caller-id enable type 1
Allows the sending or receiving of caller ID information.
Step 5
voice-port slot-number/port
Example:
VG(config)# voice-port 0/1
Enters voice-port configuration mode.
Step 6
caller-id enable [type [1|2]]
Example:
VG(config-voice-port)# caller-id enable type 2
Allows the sending or receiving of caller ID information.
Step 7
exit
Example:
VG(config)# exit
Exits to global configuration mode.