Filter
Top Products
CHAPTER
3-1
Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Software Configuration Guide
OL-16191-01
3
Configuring Your Voice Gateway Using the CLI
Follow the procedures in this chapter to manually configure the voice gateway or to change the
configuration after you have run the setup command described in the “Configuring Your Voice Gateway
Using the setup Command” section on page 2-1.
• Configuring the Hostname and Password, page 3-1
• Configuring Fast Ethernet Interfaces, page 3-3
• Saving Configuration Changes, page 3-5
Note • This chapter does not describe every configuration possible—only a small portion of the most
commonly used configuration procedures. For advanced configuration topics, see the Cisco IOS
configuration guide and command reference publications.
• If you skipped Chapter 2, “Configuring Your Voice Gateway Using the setup Command,” and you
have never configured a voice gateway before, read it now. That chapter contains important
information that you need for configuring your voice gateway.
Configuring the Hostname and Password
One of the first configuration tasks is to configure the hostname and set an encrypted password.
Configuring a hostname allows you to distinguish multiple voice gateways and routers from each other.
Setting an encrypted password allows you to prevent unauthorized configuration changes.
Restriction
You can only specify a hostname if the voice gateway has a DNS server available for hostname
resolution.
SUMMARY STEPS
1. enable
2. configure terminal
3. hostname name
4. enable secret password
5. line configuration line