Filter
Top Products
4-8
Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Software Configuration Guide
OL-16191-01
Chapter 4 Configuring Voice
Configuring the Voice Interface for Cisco Unified Communications Manager
20. dial-peer voice tags pots
21. service stcapp
22. port port-number
23. exit
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
VG# enable
Enters privileged EXEC mode.
Step 2
configure terminal
Example:
VG# configure terminal
Enters global configuration mode. You have entered
global configuration mode when the prompt changes to
VG(config)#.
Step 3
stcapp ccm-group group-id
Example:
VG(config)# stcapp ccm-group 1
Configures the CUCM group number for use by the
SCCP Telephony Control Application (STCAPP).
Step 4
stcapp
Example:
VG(config)# stcapp
Enables STCAPP.
Step 5
stcapp feature access-code
Example:
VG(config)# stcapp feature access-code
Enables STC application feature access codes and enters
their configuration mode.
Step 6
stcapp feature speed-dial
Example:
VG(config)# stcapp feature speed-dial
Enables STC application feature speed-dial codes and
enters their configuration mode.
Step 7
voice-port slot-number/port
Example:
VG(config)# voice-port 0/0
Enters voice-port configuration mode.
Step 8
timeouts initial seconds
Example:
VG(config-voiceport)# timeouts initial 60
Configures the initial digit timeout value for a specified
voice port.
Step 9
timeouts interdigit seconds
Example:
VG(config)# timeouts interdigit 60
Configures the interdigit timeout value for a specified
voice port.