Filter
Top Products
4-7
Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Software Configuration Guide
OL-16191-01
Chapter 4 Configuring Voice
Configuring the Voice Interface for Cisco Unified Communications Manager
Configuring the Voice Interface for Cisco Unified
Communications Manager
To configure voice ports to a CUCM server and set various parameters, including IP address, port
number, and version number, use the following commands.
Note The following steps are required only when the voice interface is configured manually and not through
auto-configuration.
SUMMARY STEPS
1. enable
2. configure terminal
3. stcapp ccm-group group-id
4. stcapp
5. stcapp feature access-code
6. stcapp feature speed-dial
7. voice-port slot-number/port
8. timeouts initial seconds
9. timeouts interdigit seconds
10. timeouts ringing seconds infinity
11. voice-port slot-number/port
12. ccm-manager fax protocol [protocol cisco]
13. ccm-manager config [server] ip-address name seconds
14. ccm-manager sccp local interface-type interface-number
15. ccm-manager sccp
16. sccp local interface-type interface-number port port-type
17. sccp
18. sccp ccm group group-number
19. associate ccm identifier-number priority priority-number
Step 10
ccm-manager sccp
Example:
VG(config)# ccm-manager sccp
Enables CUCM auto-configuration of the Cisco IOS
gateway.
Step 11
exit
Example:
VG(config-line)# exit
Exits to global configuration mode.
Command or Action Purpose