Filter
Top Products
Cisco Unified IP Phone 7975G Phone Guide for Cisco Unified Communications Manager 6.1(3) (SCCP and SIP) 69
Add members to an
access list.
1. Create an access list.
2. Click Add Member to add phone numbers or filters to the list.
3. Select an option from the Filter Mask drop-down list box. You can filter
a directory number, calls with restricted caller ID (Not Available), or calls
with anonymous caller ID (Private).
4. If you select a directory number from the Filter Mask drop-down list
box, enter a phone number or filter in the DN Mask field. You can use
the following wild cards to define a filter:
–
X (upper or lower case)—Matches a single digit. For example,
408555123X matches any number between 4085551230 and
4085551239.
–
!—Matches any number of digits. For example, 408! matches any
number starts with 408.
–
#—Used as a single digit for exact match.
5. To add this member to the access list, click Save.
6. To save the access list, click Save.
If you want to... Then do this after you log in...