Filter
Top Products
7-3
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
OL-15498-01
Chapter 7 Monitoring the Cisco Unified IP Phone Remotely
Disabling and Enabling Web Page Access
–
Status Messages—Displays various system messages. For more information, see the “Device
Logs” section on page 7-10.
• Streaming Statistics—Includes the following hyperlink:
–
Stream 1—Display a variety of streaming statistics. For more information, see the “Streaming
Statistics” section on page 7-11.
Disabling and Enabling Web Page Access
For security purposes, you may choose to prevent access to the web pages for a phone. If you do so, you
will prevent access to the web pages that are described in this chapter and to the Cisco
Unified CM User
Options.
To disable access to the web pages for a phone, follow these steps from Cisco Unified Communications
Manager Administration:
Step 1 Choose Device > Phone.
Step 2 Specify the criteria to find the phone and click Find, or click Find to display a list of all phones.
Step 3 Click the device name to open the Phone Configuration window for the device.
Step 4 From the Web Access drop-down list box, choose Disabled.
Step 5 Click Update.
Note Some features, such as Cisco Quality Report Tool, do not function properly without access to
the phone web pages. Disabling web access also affects any serviceability application that relies
on web access, such as CiscoWorks.
To enable web page access when it is disabled, see the preceding steps about disabling access. Follow
the same steps, but choose Enabled in
Step 4 to enable the web page.
Device Information
The Device Information area on a phone’s web page displays device settings and related information for
the phone.
Table 7-1 describes these items.
To display the Device Information area, access the web page for the phone as described in the “Accessing
the Web Page for a Phone” section on page 7-2, and then click the Device Information hyperlink.
Ta b l e 7-1 Device Information Area Items
Item Description
MAC Address Media Access Control (MAC) address of the phone
Host Name Host name that the DHCP server assigned to the phone
Phone DN Directory number assigned to the phone
App Load ID Identifier of the firmware running on the phone